Dellorto PHBG 17.5mm carburetor replica manifold powerfilter

Dellorto PHBG 17.5mm carburetor replica with manifold and powerfilter

Including:

• Carburettor model PHBG 17,5mm
• Supplied with cable choke!
• Manifold
• Powerfilter 
• Centre-to-centre distance between mounting holes: 38mm
• Only for E50 engines!
  

Note:

• Do not over-tighten the carburettor clamp!
• The float box is fixed with 4 bolts, 3 long and 1 short. Always ensure that you always place the short bolt on the corner of the air adjustment screw! If you screw in a long bolt here, it will hit the air adjustment screw and block it!
• The jet that is mounted in the carburettor / set is blank and different for each batch. (The manufacturer does this because they cannot know on which engine / setup this carburettor will be mounted). It is therefore highly advisable to order a jet-set so that you can always achieve maximum adjustment.