38mm Cylinder Sachs 50/3
- Cylinder suitable for Sachs 3-speed engines.
- For blower cooled engines.
- Incl. Piston pin 12mm
- Outer diameter cooling fins: 84 mm
- Hole spacing inlet: 32 mm
- Hole pattern cylinder stud: 40 x 50 mm
- For 28 mm exhaust manifold and one M35 x 2 mm exhaust nut.
In order to mount this cylinder on a Sachs 50/2 engine, various adaptation work is required.
We always
advise to check and clean the cylinder before installation and to finish the
ports in the cylinder with a 1000 grit sandpaper. This way the edges are no
longer too sharp because of the Nicasil coating, this will considerably extend
the life of the cylinder / piston.