Cylinder 55cc pin 12 Puch MV / VZ / DS / VS DMP 41mm

Cylinder 41mm pin 12 Puch MV / VZ / DS / VS DMP

• Cylinder neck diameter: 43mm
• Inlet stud distance: 32.50mm
• The cylinder set comes with a gasket set
• The piston is equipped with an L and block spring
• It is recommended to use a carburettor between 15mm and 19mm

Dieses Set kann u.a. für folgende Modelle verwendet werden:

• Puch MV / VZ / DS / VZ / MC

Before mounting

• We always advise to check and clean the cylinder before installation and to finish the ports in the cylinder with a 1000 grit sandpaper. This way the edges are no longer too sharp because of the Nicasil coating, this will considerably extend the life of the cylinder / piston.