Bing 15mm carburetor replica 3.5 jet stock filter Puch Maxi

Bing 15mm carburetor replica (3.5mm jet) with stock model filter Puch Maxi

Including:

• Manifold.
  
• Stock airbox
• Carburetor Bing replica 15mm (3.5mm)
  

Bing 15mm carburetor replica

• Connection diameter of the manifold 20mm
• Connection diameter of the air filter 20mm
• Nozzles/jets suitable for this carburettor are Bing 3.5mm jets/nozzles
• Carburettors are delivered with a blank nozzle/jet, of which the size is unknown.
• Carburettors should always be cleaned before installation

Bing 12-15mm manifold

• Connection diameter 20mm.
• Puch Maxi / E50
• Centre-to-centre distance between mounting holes: 38mm

Note: 

• Do not overtighten your carburetor to your manifold, as this may cause the clamp to break. No warranty when you have overtightening the clamp!
• So the nozzle should be changed at all times before fitting the carburettor with a nozzle that suits the set-up. So the blank nozzle cannot be used.
• The jet that is mounted in the carburettor / set is blank and different for each batch. (The manufacturer does this because they cannot know on which engine / setup this carburettor will be mounted). It is therefore highly advisable to order a jet-set so that you can always achieve maximum adjustment.