Bing 15mm carburetor replica
- Connection diameter of the manifold 20mm
- Connection diameter of the air filter 20mm
- Nozzles/jets suitable for this carburettor are Bing 3.5mm jets/nozzles
- Carburettors are delivered with a blank nozzle/jet, of which the size is unknown.
- Carburettors should always be cleaned before installation
Note:
- Do not overtighten your carburetor to your manifold, as this may cause the clamp to break. No warranty when you have overtightening the clamp!
- So the nozzle should be changed at all times before fitting the carburettor with a nozzle that suits the set-up. So the blank nozzle cannot be used.
- The jet that is
mounted in the carburettor / set is blank and different for each batch. (The
manufacturer does this because they cannot know on which engine / setup this
carburettor will be mounted). It is therefore
highly advisable to order a jet-set so that you can always achieve maximum
adjustment.
With a matching manifold applicable to various Puch models:
- Puch Maxi S / Maxi N / Maxi K / Maxi P / X20 / X30 / Korado / Manet and KTM hobby with E50 / Z50 / ZA50.
- Also on Puch MV / MS / VS / DS / VZ / MC / Monza / Jet / M50.
With a matching manifold also universally usable for:
- Kreidler Florett / RMC / RM / Zundapp / Yamaha DT / TY / Honda MT / MB / MBX / NSR / MTX / NS1 / Kawasaki AR / Suzuki TSX / TS / Tomos A3 / A35.