Bing 15mm carburetor 3.5 jet stock filter Puch Maxi

Bing 15mm carburetor original with stock model filter Puch Maxi

Complete set with original 15 mm Bing carburettor, original model Fast Arrow air filter and manifold

Bing 15mm carburetor original

• Connection diameter of the manifold 20mm
• Connection diameter of the air filter 20mm
• Nozzles/jets suitable for this carburettor are Bing 3.5mm jets/nozzles
• Carburettors should always be cleaned before installation
• Carburettor comes with an 82 nozzle
• Nice quality, original Bing!

Bing 12-15mm manifold

• Connection diameter 20mm.
• Centre-to-centre distance between mounting holes: 38mm

Tip: When fitting this carburetor to a Puch, we recommend using a cable elbow adjusting screw. The connection on top of the carburetor is 7mm, while the connection on the elbow is 6mm. This allows you to use a common 6mm throttle cable adjuster. First install the elbow on the carburetor, then fit the cable adjuster onto the elbow. This ensures that the throttle cable is routed neatly without any sharp bends.

Note: 

• Do not overtighten your carburetor to your manifold, as this may cause the clamp to break. No warranty when you have overtightening the clamp!
• So the nozzle should be changed at all times before fitting the carburettor with a nozzle that suits the set-up.