Dellorto PHBG 19mm carburetor replica Black Racing

Replica Dellorto PHBG Black racing 19mm carburettor.

• Connection diameter of the manifold 24mm
• Connection diameter of the air filter 32mm
• Nozzles/jets suitable for this carburettor are Dellorto 5mm jets/nozzles
• Carburettors are delivered with a blanc nozzle/jet.
• Carburettors should always be cleaned before installation.
• Cable choke control.
• Insertion carburettor 24mm connection. Fast nozzle exchange by the drain bolt on the float chamber.
• Throttle drum cover is also screwable.
• Rubber for connection is availble at the section replacement parts.

caution!

the float bowl is fixed with 4 bolts, 3 long ones and 1 short one. Always make sure you replace the short bolt on the corner of the air set screw! If you screw a longer bolt in here, it will hit the air set screw and block it.

The jet that is mounted in the carburettor / set is blank and different for each batch.

(The manufacturer does this because they cannot know on which engine / setup this carburettor will be mounted).

It is therefore highly advisable to order a jet-set so that you can always achieve maximum adjustment.

With a matching manifold applicable to various Puch models:

• Puch Maxi S / Maxi N / Maxi K / Maxi P / X20 / X30 / Korado / Manet and KTM hobby with E50 / Z50 / ZA50.
• Also on Puch MV / MS / VS / DS / VZ / MC / Monza / Jet / M50.

With a matching manifold also universally usable for:

• Kreidler Florett / RMC / RM / Zundapp / Yamaha DT / TY / Honda MT / MB / MBX / NSR / MTX / NS1 / Kawasaki AR / Suzuki TSX / TS / Tomos A3 / A35.