Puch Maxi E50 kickstart 4-bearing engine case as original with kickstart cover

Puch Maxi E50 kickstart 4 bearing crankcase with kickstart cover

This is the first kickstart crankcase set for the Puch Maxi as original to be introduced on the market with matching kickstart cover. This crankcase is an exact copy of the original with some improvements. This crankcase is very suitable as a replacement crankcase for your old crankcase under e.g. your street Puch! But of course this crankcase is also extremely suitable for racing, cross or other tuning purposes.

The crankcase is fitted with a limitation for the Dutch market:

Pin on the cylinder side to prevent mounting a faster cylinder. Pin can be easily removed. If a cylinder larger than 38 mm is fitted, the pin on the cylinder side will have to be milled away.

Please note: we recommend removing the pin on the cylinder side at all times. The pin can shrink and expand due to heat differences in the engine block, possibly causing damage to the inside of the engine block. The pin can be easily milled away.

Important data:

• 4-bearing kickstart
• With matching kickstart cover
• Cases and kickstart cover are fitted with bushings for perfect alignment
  
• The set comes with matching crankcase bolts
• The set also comes with the centre stand mounting block
  
• Exact copy of the original
• Significantly more sealing surface at cylinder mounting
• Puch original number: 349.3.10.332.0
• Puch Maxi S, Maxi K, Maxi N, X30, X40, Magnum