Clutch Puch Maxi S / N E50 pedal-start Aramid race Woven with 2 segments

Race clutch pedal-start Woven from Aramid!

• Ready to go for race, cross or fast street set-up!
• 5mm "Aramid Woven" shoe lining
• 2 Segment pedal start racing clutch
• Improvement over the original 2-segment clutch of some Puch Supermaxi models and the Magnum X
  
• On original Surflex clutch plate
• Reinforced with a reinforcement plate, this prevents bending of the clutch base plate
  
• Specially assembled and tuned for Puchshop. Set at 5000 rpm with 50N/mm springs but can be adjusted with included stronger 100N/mm springs.
• Only for the E50 engine

These racing clutches are specially produced and tuned for Puchshop. These clutches are often used in a moped running at high speeds. An original E50 clutch is less suitable for high revs , this is what these racing clutches are designed for. This clutch is very suitable for a set-up from a fast 50cc to a 74cc

Note:Before assembly, it is recommended to soak the clutch in ATF oil for 24 hours