Exhaust Puch Maxi / E50 28mm Fuego Cross black
Read more about the European VAT rules
- Directly available
- Model: 30045
Fuego Cross black exhaust.
- 28mm connection.
- Now complete with exhaust manifold and clamp
Measurements exhaust (picture 4)
- A: 930mm length
- B: 300mm length
- C: 630mm length
- D: 28mm outer diameter
- E: 25mm inner diameter
- Use our long brass M6 nuts in combination with hardened studs (see related products). This so you can easily and fully tighten the exhaust flange. Brass is also softer than steel, so it will not seize.
- Always use a new exhaust gasket when fitting an exhaust
When using all exhausts, black painted, chrome and blanc exhausts, heat build-up at the exhaust manifold can cause the following:
- At black outlets the paint can dissolve a little.
- Chrome and blanc exhaust manifolds may discolour
If the nozzle is too small or if the ignition is set incorrectly, the exhaust port becomes very hot and discoloring and dissolve of the paint on the exhaust manifold will occur faster than a perfectly adjusted engine. We give no guarantee on discoloration or solving of the paint on the exhaust manifold!