Exhaust Puch Maxi / E50 28mm BGM Tuning Expansion pipe

Exhaust Puch Maxi / E50 28mm BGM Tuning Expansion pipe

Give your Puch Maxi a serious upgrade with this high-quality handmade BGM Tuning expansion exhaust. Beautifully welded with visible weld seams and a rugged raw look, giving it a truly unique appearance. Specially developed for maximum torque and a wide rev range, ideal for both street use, race and sporty riding.

• New from BGM tuning; the first ready-to-use Puch exhaust
• Handmade in the Netherlands
• Material: Bare steel with clear lacquer finish and a black silencer
• Best suited for standard and tuned 65cc / 70cc cylinders but also very suitable for the 72cc!
• Seperate exhaust flange that is attached to the cylinder so that the exhaust can easily be fixed with exhaust springs.

Tips:

• Fit the exhaust flange to the cylinder with standard m6 nuts and washers so that the exhaust fits neatly over the flange.
  
• Always use a new exhaust gasket when fitting an exhaust

When using all exhausts, black painted, chrome and blanc exhausts, heat build-up at the exhaust manifold can cause the following:

• At black outlets the paint can dissolve a little.
• Chrome and blanc exhaust manifolds may discolour

If the nozzle is too small or if the ignition is set incorrectly, the exhaust port becomes very hot and discoloring and dissolve of the paint on the exhaust manifold will occur faster than a perfectly adjusted engine. We give no guarantee on discoloration or solving of the paint on the exhaust manifold!