Tecno Circuit Off-road model exhaust Puch Maxi / E50 black
- Suitable for 50cc and 70cc cylinders.
- Blank varnished with alu silencer.
- Good for torque, use this for your cross Puch
- 25mm outer diameter manifold
- Very cool and deep sound.
- The exhaust is supplied with a mounting bracket and silent rubber; the silent rubber is mounted on the shock absorber mounting bolt.
Note: The exhaust cannot be used in combination with side panels and/or frame brackets / tank luggage carrier
Tips:
- Use our long brass M6 nuts in combination with hardened studs (see related products). This so you can easily and fully tighten the exhaust flange. Brass is also softer than steel, so it will not seize.
- Always use a new exhaust gasket when fitting an exhaust
When using all exhausts, black painted, chrome and blanc exhausts, heat build-up at the exhaust manifold can cause the following:
- At black outlets the paint can dissolve a little.
- Chrome and blanc exhaust manifolds may discolour
If the nozzle is too small or if the ignition is set incorrectly, the exhaust port becomes very hot and discoloring and dissolve of the paint on the exhaust manifold will occur faster than a perfectly adjusted engine. We give no guarantee on discoloration or solving of the paint on the exhaust manifold!