Bing SRE 17mm carburettor Puch Maxi Replica (3.5 mm jet)

Bing 17mm Carburetor

Replica 17mm Bing carburetor, visually identical to the original 12 and 15mm carburetor!

• Connection diameter intake manifold: 23 mm
• Connection diameter air filter: 28 mm
• Jets suitable for this carburetor: Bing 3.5 mm
• Carburetors should always be cleaned before installation
• See related products for the matching intake manifold and air filter

Attention:

• Do not overtighten the carburetor on the intake manifold, as there is a risk that the clamp may break. No warranty applies to damage caused by overtightening the clamp!
• The jet must always be replaced before installing the carburetor with one that matches your setup. The blank jet cannot be used.
• The jet installed in the carburetor / set is a blank jet and may vary per batch. (The manufacturer does this because they cannot know on which engine/setup the carburetor will be used.) It is therefore highly recommended to order a jet set as well, so you can achieve optimal tuning.