Dellorto PHBG 17.5mm carburetor replica with manifold and air filter

Including:

• Carburetor model PHBG 17.5mm
• Manifold Dellorto 17-20mm
• Suction rubber
• Sieve airfilter
• Clamp
• Centre-to-centre distance between mounting holes: 38mm
• Only for E50 engines!
  
• Note: do not over-tighten the carburettor clamp!
  

caution!

the float bowl is fixed with 4 bolts, 3 long ones and 1 short one. Always make sure you replace the short bolt on the corner of the air set screw! If you screw a longer bolt in here, it will hit the air set screw and block it.

The jet that is mounted in the carburettor / set is blank and different for each batch.

(The manufacturer does this because they cannot know on which engine / setup this carburettor will be mounted).

It is therefore highly advisable to order a jet-set so that you can always achieve maximum adjustment.