Wheel axle with closed ball bearings for Puch front wheel
- This set converts the original hub with loose ball bearings to fixed ball bearings
- The set consists of a 157 mm long wheel axle, two special ball bearings, two half height and high M12x1 nuts and various distance bushings.
- Works with starwheel hubs and spokewheel hubs.
- The already greased bearings have an outer diameter of 29 mm and are provided with a dust cover on one side.
- Installation instructions: When installing the ball bearings, it must be ensured that the long spacer bush between the two ball bearings must be clamped. If necessary, you have to add a thin washer so that it is really guaranteed that the two bearings press on the distance bush with the inner ring. If this is ignored, the ball bearings will inevitably jam.
Note: before ordering, compare the outside dimensions of the original old bearings with the new ones from this set!