Dellorto PHBG Carburettor 16mm.
- Connection diameter of the manifold 24mm
- Connection diameter of the air filter 32mm
- Nozzles/jets suitable for this carburettor are Dellorto 5mm jets/nozzles
- Carburettors are delivered with a 78 nozzle/jet.
- Carburettors should always be cleaned before installation.
- Hand choke control.
- Dellorto 2511
- Note: do not over-tighten the carburettor clamp!
So the nozzle should be changed at all times before fitting the carburettor with a nozzle that suits the set-up.
Standard specifications:
- W7 needle
- 74 main nozzle
- 262AU atomizer
- 50 Idle nozzle
- 55 Choke nozzle
- 9450.1 Float - 4.0 grams
With a matching manifold applicable to various Puch models:
- Puch Maxi S / Maxi N / Maxi K / Maxi P / X20 / X30 / Korado / Manet and KTM hobby with E50 / Z50 / ZA50.
- Also on Puch MV / MS / VS / DS / VZ / MC / Monza / Jet / M50.
With a matching manifold also universally usable for:
- Kreidler Florett / RMC / RM / Zundapp / Yamaha DT / TY / Honda MT / MB / MBX / NSR / MTX / NS1 / Kawasaki AR / Suzuki TSX / TS / Tomos A3 / A35.