Bing 15mm carburetor replica.
- Connection diameter of the manifold 20mm
- Connection diameter of the air filter 20mm
- Nozzles/jets suitable for this carburettor are Bing 4mm jets/nozzles
- Carburettors are delivered with a blank nozzle/jet, of which the size is unknown.
- Carburettors should always be cleaned before installation.
Note: Do not overtighten your carburetor to your manifold, as this may cause the clamp to break. No warranty when you have overtightening the clamp!
So the nozzle should be changed at all times before fitting the carburettor with a nozzle that suits the set-up. So the blank nozzle cannot be used.
The jet that is
mounted in the carburettor / set is blank and different for each batch. (The
manufacturer does this because they cannot know on which engine / setup this
carburettor will be mounted). It is therefore
highly advisable to order a jet-set so that you can always achieve maximum
adjustment.
With a matching manifold applicable to various Puch models:
- Puch Maxi S / Maxi N / Maxi K / Maxi P / X20 / X30 / Korado / Manet and KTM hobby with E50 / Z50 / ZA50.
- Also on Puch MV / MS / VS / DS / VZ / MC / Monza / Jet / M50.
With a matching manifold also universally usable for:
- Kreidler Florett / RMC / RM / Zundapp / Yamaha DT / TY / Honda MT / MB / MBX / NSR / MTX / NS1 / Kawasaki AR / Suzuki TSX / TS / Tomos A3 / A35.