Dellorto PHBG 19mm DS carburetor ori spigot Black racing

Replica Dellorto PHBG Black racing 19mm carburettor.

• Connection diameter of the manifold 24mm
• Connection diameter of the air filter 32mm with adapter 38mm
• Nozzles/jets suitable for this carburettor are Dellorto 5mm jets/nozzles
• Carburettors should always be cleaned before installation.
• Cable choke control.
• Fast nozzle exchange by the drain bolt on the float chamber. (M32)
• Throttle drum cover is also screwable.
• Rubber for connection is availble at the section replacement parts.
• Insertion version
• Dellorto 2695

Standard jetting

• 30 Slide
• W9 Needle
• 262AN Atomiser
• 75 Main jet
• 45 Idle jet
• 60 Choke jet
• 9450.1 Float – 4.0 grams

With a matching manifold applicable to various Puch models:

• Puch Maxi S / Maxi N / Maxi K / Maxi P / X20 / X30 / Korado / Manet and KTM hobby with E50 / Z50 / ZA50.
• Also on Puch MV / MS / VS / DS / VZ / MC / Monza / Jet / M50.

With a matching manifold also universally usable for:

• Kreidler Florett / RMC / RM / Zundapp / Yamaha DT / TY / Honda MT / MB / MBX / NSR / MTX / NS1 / Kawasaki AR / Suzuki TSX / TS / Tomos A3 / A35.